3 vấn đề thường gặp khi dùng Dầu Cắt Gọt Kim Loại

1. Oil will cause a stench

The stench of the oil will directly affect the user as well as the surrounding environment. The main cause of this problem is contamination in the oil storage tank, which leads to the formation of bacteria. In addition, the reason can also be because we choose poor quality oils or recycled oils; or the water mixed with oil is contaminated and the ratio of oil to water is not suitable.

So how do we fix this problem?

• Regularly clean the oil tank, pick up metal shavings during processing that splash into the oil.
• Double check the oil quality, do not use poor quality oil or recycled oil.
• Use oils with a high detergent content to prevent metal shavings and chips.
• Mix oil with water according to the ratio recommended by the oil manufacturer.
• Add a biocide and use a synthetic base oil that has optimal properties for a working oil

2. The workpiece is rusted during the use of metal cutting oil

The causes of the machining material rusting during the machining process, the use of oil can be due to the amount of water being mixed too much, the machining location is wet, the material is of poor quality, in the composition of the oil. contains less anti-corrosion additives, …

Although this is a problem that causes many inadequacies, so we need to find ways to quickly overcome the situation of rusty workpieces during the use of oil. Accordingly, after processing the material, we should use anti-rust oil to protect the workpiece, preserve the details in the warehouse to avoid humid air, use quality lubricants, ....

3. The surface of the machined material is bad, the CNC machine is not working correctly

Due to the poor lubricating and cooling ability of the emulsion, the friction between the workpiece and the machine tool is not accurate, thereby causing the bad material's surface to be not smooth.

The fix: use a high-quality oil with good lubricating and cooling properties, and choose a metal cutting oil with a high detergent content.

Please respect the quality factor when buying industrial metal cutting oil

Buy the right metal cutting oils of good quality and use them properly

There are two most important factors to limit the inadequacies that can occur during the use of metal cutting oils, which is to buy the right oils of good quality and use them correctly. And to do this is not difficult, you just need to choose a reputable metal cutting oil sales address.