On the market today, there are 3 types of metal oils: water-based metal cutting oils and water-free metal cutting oils, synthetic metal cutting oils. In which oil without water is used for metal cutting with mineral-based ingredients. Absolutely no Hydrocarbons but contains chlorine. But the product has a pretty good load-bearing capacity. And has good fogging ability and low volatility which is very suitable for hard metal objects and non-ferrous metals. In addition, the product has the advantage of finishing quite quickly on metal surfaces. It is for these reasons that waterless cutting oils are widely used by techniques to lubricate hard metals - non-ferrous metals.
Reduces wear on metal surfaces and cutters
The product has the advantage of being able to lubricate and cool metal very well. So it can minimize the corrosion on the metal surface. Not only that, but the product can reduce friction and bring about the effect of the quality of processing. When used, the product is quite friendly because it has a light scent that is not pungent. And has a high antioxidant capacity. Very suitable when you use metal shrink and thread turning, drilling, grinding, milling…etc.
Do not burn – deform the metal to be processed
About the basic composition of the metalworking cutting oil, it does not contain substances such as nitrite or phenol compounds. When you use this oil directly it does not harm the skin or cause allergies. Especially this oil, when applied in work, its characteristics do not cause an explosion and deform the processed metals. In addition, when you use this oil for modern machinery equipment or tools, it will help prolong its life. And significantly reduce costs. At the same time, it is possible to increase the glossiness of metals.
Wash away metal dirt generated when cutting
During the working process of metalworking, metal parts often create dust of tiny metal particles. And the water-free cutting oil product will have the effect of washing away the dirt. Thanks to a few cleaning agents included in the composition of the product. But one if you do not take measures to filter or handle in time. Then these mixtures will spill out and it is very difficult to decompose. It will greatly affect the surrounding environment.
Reduce the temperature of the cutter
During the execution of the work, the cutter will heat up significantly. This will make the machine degrade very quickly because if the machine is hot for a long time, it will cause wear to the machine. Therefore, you need to use metal cutting oil products because the product has a cooling effect as well as reducing the temperature significantly for the knife. Helps the knife to cut smoother and more sensitive. As well as resisting wear and significantly increasing the life of the tool. Make your work more efficient.
